Base/plinth system VX accessories

Transport castors For VX base/plinth systems

For fitting on the base/plinth corner piece, height 100 or 200 mm.

Base mounting plate for VX base/plinth, AX base/plinth and complete base/plinth

To fasten the base/plinth to the floor without moving the enclosure or bayed enclosure suite. For fastening screws up to 12 mm Ø.

Base/plinth system VX accessories

Base/plinth expansion angle For VX base/plinth systems, sheet steel and stainless steel

For upgrading the base/plinth with system chassis or cable clamp rail. Suitable for 100 and 200 mm high base/plinth trim panels made from sheet steel or stainless steel.

Base/plinth system VX accessories

Leveling component For VX base/plinth systems

For subsequent leveling on uneven floors at the installation site up to a maximum of 15 mm. Installed through the base/plinth corner piece.

Base/plinth system VX accessories

Cross member for VX, TS, VX SE, TP, PC, IW, Blue e+ chiller

To increase stability, the cross members project 138 mm beyond the enclosure base frame at the front and rear.

Base/plinth system VX accessories

Filter Mat For base/plinth trim panels, vented

The filter mat can be easily inserted into the trim panel from the rear. Can be shortened to required length.

Base/plinth system VX accessories

Baying cover For VX base/plinth systems

For neatly closing the gap between two bayed base/plinths. Required to close the gap at the rear when baying three or more base/plinths.

Base/plinth system VX accessories

Optional orifice mounting for VX For trim panel with brush strip, vented trim panel

Additional bracket for securing panels with brush strips or ventilated panels in-depth on the VX base system.

Base/plinth system VX accessories

Base/plinth adapter For twin castors and leveling feet

For mounting the double casters 7495.000 and leveling feet on the VX, AX base system.

Base/plinth system VX accessories

Base/plinth baying brackets for base/plinth system VX, sheet steel, new version

Required if the 100 mm or 200 mm side trim panels are mounted rotated through 90° for additional stabilization during the transportation of bayed enclosures.